Residential Electric Rates By State JAN 2011
Most Expensive Electric Prices [Cents per kilowatthour] [Deregulated, yes or no]
1. Hawaii – 30.13 (no)
2. Connecticut – 18.03 (yes)
3. New York – 17.40 (yes)
4. Alaska – 16.61 (no)
5. New Hampshire – 16.34 (yes)
6. Rhode Island – 16.21 (yes)
7. New Jersey – 16.14 (yes)
8. Vermont – 15.79 (no)
9. Maine – 15.78 (yes)
10. California – 15.30 (yes)
Most Cheapest Electric Prices [Cents per kilowatthour] [Deregulated, yes or no]
1. North Dakota – 6.92 (no)
2. Nebraska – 7.72 (no)
3. Arkansas – 7.77 (yes)
4. Idaho – 7.83 (no)
5. Louisiana – 7.94 (no)
6. Washington – 8.02 (no)
7. Oklahoma – 8.06 (yes)
8. Missouri – 8.16 (no)
9. Utah – 8.17 (no)
10. South Dakota – 8.24 (no)
Electricity costs weigh heavily on the budget of many families. While many consumers are just wanting to get the most bang for the buck. The more one understands how the process works, the better a customer can manage utility costs. Monitoring utility costs by state is a good way to track increases or decreases. What a consumer should be aware of is the price of electric per kilowatt hours. That price varies by location. Obviously, some states have higher rates than others.
Is there a website to track electricity prices per kilowatt hours? You bet! The U.S. Energy Information Administration publishes a Electric Power Monthly, which gives Average Retail Price of Electricity to Ultimate Customers. Not only does this page list residential rates, it also lists commercial rates, along with other valuable information.
Have electricity prices changed within the last several years? The answer is yes. For the most part the changes have not been that dramatic.
However, keep in mind that deregulation has played a major role in states that have been hit really hard with skyrocketing utility bills. This list does not attempt to cover what has happened concerning deregulation. Nor does this list cover the thousands of utility shutoffs rising in states like Michigan, New York, Pennsylvania, Florida, and California.
I quickly glanced at the rates between 2008 and 2011. It appeared to me that the more expensive rates had actually gone down somewhat. For example, Hawaii went from 36.94 to 30.13 cents per kilowatt hours. That applied to several states, but not all.
Some, if not many (states) with cheaper rates showed an increase. For example, Kentucky and West Virginia showed an increase. They are no longer in the top ten least expensive category.
Overall, there was not a huge difference in rates. But I do believe it’s time to consider putting together other alternative energy systems. Solar panels, wind turbines, and other energy saving devices are starting to look more attractive as time passes by. Not to mention the inconveniences brought about by numerous power outages.
Source: U.S. Energy Information Administration
Note: Estimates are calculated by the EIA. Prices may vary accordingly.
12 Responses
jana
July 27th, 2011 at 1:38 pm
1FYI, in San Diego, we pay 1) baseline of $.05322 2) 1-30% over baseline of $.07461; PLUS Summer electricity generation charge of 3) $.07983. This month, my 361 kWh charge = $50 and the total was about $.20/kWh, not the $.15 that you published.
srisangeetha
August 12th, 2011 at 2:01 am
2We like to discuss about the tires you obtain are for that unique motorbike model. Refer to your owner’s guide for information on the size.Tires in Miami
how much is your electric bill? is this normal? - Page 3 - Financial Management - MilitarySOS.com
October 12th, 2011 at 11:18 pm
3[…] Electric Prices By State 2011 | KI4KQD BLOGGER There is a break down of the cost per kwh by state. __________________ One True Love […]
Chris
December 9th, 2011 at 2:51 pm
4It’s amazing to me how PUCs do not disclose the transmission power factor (PF) in their rating trigonometry. Although, PF is not factored in as a monthly, fluctuating component, it is still part of Watts Law calculations. Simply, why not tell us what you “think” PF will need to be on the generation side so that we can know what power quality correction measures can be undertaken on the demand side (aka home) to reduce amp loads that translate into reduced lower kWh, which translates into lower power bills and a better returning Q-factor for the PUC. Before the techies chime in, in God we trust but everyone else bring metered data, not rhetoric. A simple PQ test using a meter than measures V, A, kVAR, kVA, and PF will expose the problem, if any. Regardless of the PF, if the reactive signature (kVAR/kVA) is 50% or higher, your amp loads will be higher. Shunt the reactive signature and am loads will go down. Period. There is no HAVC/R or electrical contractor or mechanical or electrical engineer that will refute that a reactive signature of 50% or higher will mean higher amps because that impacts RMS. It’s all about the heat! So, test the line side PQ to FIRST determine the baseline for ECM. At the end of the day, the professionals are either gonna believe their lying eyes or their lying ears. I cast my lot with the eyes, let’s see the metered data. Prove all things, hold fast to that which is metered.
U.S. shale gas cuts electricity prices by 50% - Page 4
January 17th, 2012 at 4:48 pm
5[…] […]
Question about cost of electricity
April 1st, 2012 at 1:04 am
6[…] would be 160$, monthly. Yes, that's fucking expensive. Here are some comparative figures of Kwh: http://onthesquid.com/2011/05/23/electri…by-state-2011/ Reply With Quote « Smell | – […]
aquaponics! | Modern Practicality
January 15th, 2013 at 6:40 am
7[…] 3. Low power requirement; the air pump I’m using uses 40W… 40W x 24 hrs x 365 days = 350,400 watt hours/year = 350.4 KWH/year (!). Even in Hawaii, that is only $105.58 a year; slap a solar panel ($200 @ Costco) and deep cycle marine battery on it and you’re approaching free. (source) […]
Jack Hunter
March 27th, 2013 at 5:15 pm
8I’ve been surfing looking at various charts & data and none mention the territory of Puerto Rico. Getting a handle on rates is difficult as the power company here is most politely referred as being about as transparent as one can get. In the past 4 months the price has varied from around $0.277 per kilowatt hour to $0.301. That’s because 1) basic charge 2) fuel costs
3) “fixed charges” all change every month.
The only state paying higher rates than PR is Hawaii! And, if you include PR in your data, you’d see a remarkable spike in the national average.
RD Bentley
March 28th, 2013 at 6:39 pm
9Hello Jack! Thank you for this information. I never knew this but I did know that Hawaii is very expensive for the price of electricity. Interesting. Thanks for the comment. Roger
youtube mp3 dönüştürücü
July 10th, 2013 at 8:40 am
10….
Johng242
August 29th, 2014 at 2:53 am
11Excellent post. I was checking continuously this blog and I’m impressed! Extremely useful information specially the last part dfbadbcbdgde
Johna689
August 29th, 2014 at 2:53 am
12Im genuinely enjoying the style and layout of one’s website. Its a very uncomplicated on the eyes which makes it a great deal much more enjoyable for me to come here and pay a visit to far more typically. Did you hire out a designer to make your theme? Excellent perform! gcggbgeeebgd
RSS feed for comments on this post · TrackBack URI
Leave a reply
Subscribe to Feed
Subscribe Now!
Featured Deal ➸
Social Button ➸
Categories
Archives
SQUIDBOARD
Academic Tech
Multimedia MegloMania
Tech Toolbox
Meta
Navigate the Night Sky like Galileo ➸
Popular Squids ➸
2. HDMI To RCA Composite Enables Users To Stream With Old TVs ... On The Squid ► If you’re wanting to stream content with a device such as Apple TV for example, but you do not have a flat screen TV, there’s a gadget that you might be interested in. The HDMI to RCA composite enables users to stream with the old style television. Yes, Apple fans can watch Apple TV with that old TV. Chromecast is another viable choice.
3. Roku Purple Light Keeps Blinking ... On The Squid ► The Roku set top box updates itself often. Not long after a reset I noticed one of the Roku boxes was doing something rather odd. The purple light continued to blink and it wouldn’t stop. The Roku unit worked great, but the purple light kept blinking. The light should not be blinking all of the time.
4. The NooElec Dongle Is Too Much Fun! ... On The Squid ► For around $20, the NooElec Dongle is way too much fun! It’s not for everybody, but for the tech that doesn’t mind spending a little time with it, the benefits pay off.
5. The Big Zapper: All Band Doublet ... On The Squid ► Uses 96 feet quarter wave, or per leg. Copper wire (solid) preferred is AWG #14 or #12. Width is 192 feet total.
6. How To Program Baofeng UV5R ... On The Squid ► New out of the box—one must learn to program your Baofeng UV-5R radio. This guide is useful especially for newbies. I’m mostly interested in programming simplex type applications, along with local emergency frequencies.
7. Cheaper Wire For Ham Antenna Projects ... On The Squid ► Especially for listening to the lower bands in this crazy unpredictable solar cycle, I’m accustomed to building my own antennas. Thicker copper wire is usually the standard, but over the years I’ve learned that thinner gauge wire will hold out sufficiently. It’s all in the packaging. Here are a few scattered ideas.
8. Live Police Scanner Feeds On Your Computer ... On The Squid ► Want to listen to live streaming radio transmissions of police, fire, and EMS in your area? Do you own a computer with internet access? If so, you now have a police scanner. Listen to live audio online in the United States.
9. Kenwood 590 EQ Settings ... On The Squid ► The Kenwood TS-590S EQ settings will give the user optimum TX audio if properly configured. This transceiver is hard to beat for the money. Some will use the default mode, while others take the benefit of the ARCP-590 software. Follow this and you will have sparkle and articulation.
10. The Guide to Setting Up Google Chromecast ... On The Squid ► Setting up Chromecast is a simple process for the most part, and the reward is worth it. Just follow along with my guide and you’ll get your Chromecast going. If you have trouble with setup you can leave a comment and I will do what I can to help.
Poll ➸
Recent Posts
Recent Comments
Most Commented
© 2024 ON THE SQUID is proudly powered by WordPress - BloggingPro theme by: Design Disease. Technical assistance provided by Zach. Thanks for your support!